NOTE: DO THIS AT YOUR OWN RISK
I would like to thanks to my Co - Team28Devs, and to all member who help us. THANKS guys and THIS IS IT.
1st THING
*Kung anong steps yung ginagawa ko yun lang sundin, wag na wag ka ng gumawa ng sarili mung mundo dahil na sa isang mundo lang tayo.
*Hindi ako responsible sa mga bootloop na magagawa niyo dahil hindi ako may hawak ng unit niyo. Na sa inyo na yan kung paano niyo ginawa basta sundin niyo ng maigi yung TUTORIALS.
2nd THING
*ETO ANG IMPORTANTE
*DAPAT GAMITIN YUNG UTAK NATIN HA OKAY BA YUN?
*THATS ALL
NOTE: MAGKAIBA UNG SA MY28 AT MY28s
========================================================================
SO LETS START
Download this firmware: MyPhone My28 Smartlock (Openline) Firmware by Team28DEVS
[Please login or register to view this link]
Also download this 2 links
Upgrade Download Tool: [Please login or register to view this link]
SPRD NPI USB Driver: [Please login or register to view this link]
AFTER YOU DOWNLOAD ALL THIS LINK, EXTRACT IT USING WINRAR.
=========================================================================
HOW TO FLASH?
*Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)
*Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)
*After you open Upgrade Download, Click LOAD PACKET
*Then find the extracted folder of MyPhone My28 Smartlock (Openline) Firmware by Team28DEVS and click the pac file (Wait for a few seconds until the pac file will load)
*After the pac file will load, click the START DOWNLOADING (Parang Arrow)
*REMOVE your battery and insert it back
*Hold Vol + and Vol - together, then connect the USB Cable into the PC.
*If you can see "IN PROGRESS" in the Upgrade Download Tool, you can release the Vol + & -
*It will flash and just wait for a few minutes (It takes 3 - 5 minutes, so be patience)
*When the flashing is "PASSED" It means you made it
*Remove your unit in PC and Manually Reboot your device.
*Wait 5-10 minutes to boot your device. (1st time boot, matagal talaga pero 2nd time and so on hindi na)
*Then if you're in SYSTEM now, try to Install Kingroot Apk (Pre-Rooted kasi yung firmware kaya may root access kana agad kung ma install mo yung Kingroot)
*Problem in INSERT SIM? (Reboot lang ng reboot hanggang sa babalik yung signal, bugged po kasi yan ng My28, at hindi lang ang My28 ang may problema na ganyan pati din sa My27 ganyan din so salamat sa pag intindi)
*CREDITS to all Team28Devs
============================================================
N O T E: This firmware is not applicable for My28s. Hindi namin alam kung working ba sya sa My28s or hindi, baka kasi ma ano pa yung unit niyo, kaya TAKE RISK kung gusto niyo e try. Basta yung suggest namin mga Team28Devs is don't try it muna kasi di pa namin subok yan. (TRY IT IN YOUR OWN RISK)
============================================================
Credits to all - TEAM28DEVS
Thanks and God bless.
Myphone "My28" Openline Firmware
Re: Myphone "My28" Openline Firmware
Ano po yung password sa firmware????
plss.. po pa send po ng password sa email ko po
kimmoy16.21@gmail.com
plss.. po pa send po ng password sa email ko po
kimmoy16.21@gmail.com
-
- Posts: 1
- Joined: Fri Sep 02, 2016 3:37 pm
Re: Myphone "My28" Openline Firmware
anu po yun password ? need kulng kasing ma openline po ang myphone my28 po . SAlamat ..
Re: Myphone "My28" Openline Firmware
hello po gusto ko po sanang malaman kung ano yung password for Firmware pa send nalang po sa email ko michael.blance.mb@gmail.com salamat po godbless
Re: Myphone "My28" Openline Firmware
pass po ng rom pakisend nalang po sa email ko acedemonz@gmail.com thank you po rito
-
- Posts: 1
- Joined: Wed Oct 31, 2018 7:27 am
Re: Myphone "My28" Openline Firmware
Boss maraming salamat sa TUT mo, phingi nmn password pra ma install na...e2 po email ko babymichaeldanny@gmail.com