Note : Connect USB ports then Install your Respective Driver software
UNLOCK
Download [Please login or register to view this link] ZTE MF65
Download [Please login or register to view this link]
Extract and Copy or Move the Files to the "C:\Program Files\DC-Unlocker"
Insert an Globe/TM Sim to Modem [If SmartBro] viceversa
Run as Admin > dc-unlocker2client.exe > Scan for > ZTE modems after Scanning and it Detects Close it!
Note : Remember the PORTS [Application Port] and [Diagnostic Port]
Run as Admin > dccrap.exe scan for ZTE datacards and Click Unlock!!
Congrats! Your Modem is Unlocked now!
Note : Di ko pa na Try ito kasi di naman same sa device ko. Wala ako pananagutan kung masira man.
Pero ang Process na ito ay pareho lang sa ZTE MF60 pero iiba lang File na Ginamit. At may nakapag reply dito sa Thread na Success ang Process.
HUWAG MAG DEBRAND, DAHIL PARA SA MF60 ANG DEBRAND
★ ★ZTE MF60 CHANGE APN w/o DEBRAND★ ★
Advantages:
You will have more up-to-date firmware. With the branded firmware, you're stuck on that version until your operator release a new firmware.
With the newest firmware from ZTE, you're now can have up to 10 concurrent connections to the router. The ZTE firmware alllows 5.
You will get more information on the device like downlink speed and uplink speed. You can customize your device more
You can have your router in USB-mode, this feature is disabled on original ZTE firmware.
Disadvantages:
You lose your warranty of the device. You have no way to re-install your device back to original ZTE firmware.
Unlocking Files [Please login or register to view this link]
Let's start
**Install MF60 driver**
++Please Remove the SIM++
0. Connect the Modem using the "USB wire"
1. "Run As Administrator" telenor firmware tool and wait until the upgrade button becomes available.
2. Close the tool. DONT UPGRADE YET!!
3. Now your windows should found the new devices, it should look something similar to this. Wait until all devices are installed.
4. Start the official ZTE firmware tool. and PATCH TOOL!
5. Once it is PATCH , next is UPDATE!
6. Wait until it's finished, it will take around 5-10 mins
7. Now you have original ZTE firmware installed! The HOME now is m.home or 192.168.0.1 . The PASSWORD is "admin"
8. To enable USB mode, simply run Telenor tool again and wait until the upgrade button become available. Close the tool. That's it. With the original firmware, the battery indicator is still there even if you're in diag mode.
9. Enjoy your debranded ZTE MF60!
Note: Before you change your APN , DISCONNECT FIRST!
Credits to : Bankie